80
M 322
Operator Manual
RISK OF EXPLOSION OR FIRE. Do not use the machine in areas that could be ex-
posed to inflammable vapours (petrol, paint solvents, etc.).
Do not install the machine in a narrow area or below floor level
DANGER
Do not install the machine outdoors.
It is designed to be used in closed,
covered areas.
Install the tyre changer in the chosen
work position, complying with the
minimum clearances shown in
fig. 9
.
The support surface must have a load-
bearing capacity of at least 1000 kg/m
2
.
Ambient conditions in the place
of operation
- Relative humidity 30% - 95% without
condensation.
- Temperature 0°C ÷ 50°C.
5. DESCRIPTION OF M 322
The M 322 is an electropneumatic tyre changer.
The machine is compatible with any type of drop-centre single-piece rims with the di-
mensions and weights indicated in the paragraph TECHNICAL DATA.
The sturdily constructed machine operates with the wheel in a vertical position for bead
breaking and in a horizontal position for mounting and demounting tyres. All machine
movements are controlled by the operator
from the pedals.
Each machine has a data plate Fig. 10, with
information about the machine and some
technical data.
As well as the manufacturer’s details, the
plate indicates:
Mod. - Machine model;
V - power supply voltage in Volts;
500
500
500
9
10
Summary of Contents for M 322
