84
M 322
Operator Manual
6. BASIC PROCEDURES - USE
CRUSHING HAZARD:
Some parts of the machine, such as the de-
mounting/mounting head, the bead breaker
and the turntable, move during operation and
may constitute potential crushing hazards.
Keep hands and other parts of the body well
away from moving parts of the machine .
CAUTION!
In order to prevent damage or involuntary movement of the machine, it is recom-
mended to only use original SIMPESFAIP SpA spare parts
CAUTION!
6.1. PRELIMINARY CHECKS
Check that there is a pressure of at least 8 bar on the Filter Regulator pressure gauge.
If the pressure is below the minimum level, some machine operations may be limited
or insufficient.
After the correct pressure has been restored, the machine will function properly.
Check that the machine has been adequately connected to the electric mains and the
pneumatic supply.
6.2. DECIDING FROM WHICH SIDE OF THE WHEEL THE TYRE
MUST BE DEMOUNTED
See fig. 14. Find the position of rim well A on the rim.
Find the largest width B and the smallest width C.
The tyre must be mounted and demounted with the
wheel on the turntable with the smallest width side
C facing upwards.
A
B
C
14
Summary of Contents for M 322
