M 322
Operator Manual
85
See the paragraph “TABLE FOR USING CENTRING AND CLAMPING ACCESSORIES
ACCORDING TO RIM TYPE” in this manual.
CAUTION!
When working with easily damaged wheels
When working with “easily deformable” rims (i.e.
a central hole with thin, projecting edges - see Fig.
14A) we recommend using the universal flange
for blind rims (see the section “TABLE FOR US-
ING CENTRING AND CLAMPING ACCESSORIES
IN RELATION TO RIM TYPE” in this manual).
SPECIAL WHEELS
Alloy rim wheels:
some wheels with alloy rims
have a minimum A rim well or do not have any
well -
Fig. 14B
. These rims are not approved by
DOT standards (Department of Transportation).
The DOT initials certify that tyres comply with the
safety standards adopted by the United States
and Canada (these wheels cannot be sold in
these markets).
High performance wheels (asymmetric curvature)
-
Fig. 14C
some European wheels have rims with a very
pronounced curvature C, except in the area of the valve
hole A where the curvature is less pronounced B. On
these wheels the bead must first be broken in the area
of the valve hole, on both the top and bottom sides.
Wheels with pressure sensor -
Fig.14D
. To work cor-
rectly on these wheels and avoid damaging the sensor
(which can be incorporated in the valve, secured to
the belt, glued inside the tyre, etc.) suitable mount-
ing/demounting procedures must be observed (refer
to “Approved mounting/demounting procedure for
runflat and UHP tyres”).
Remove the old weights from the rim before starting work operations.
CAUTION!
14A
A
14B
A
B
C
14C
A
B
C
14D
Summary of Contents for M 322
