98
M 322
Operator Manual
Turntable will not turn. Engine makes buzzing noise
Motor operating with two phases only.
➥
Replace the inverter.
➥
Check plug, power socket, motor base and inverter for detached wires.
➥
Replace the motor.
Gear unit noisy. The turntable makes 1/3 of a revolution
and then stops
Gear unit seizing.
➥
Replace the gear unit.
Table top fails to clamp wheels
Turntable does not clamp rim.
➥
Replace the turntable cylinder.
Clamp grippers are worn.
➥
Replace the clamping gripper tips.
Turntable mounts or demounts tyres with
difficulty
Insufficient belt tension.
➥
Adjust belt tension (fig.48) or replace it.
Vertical clamping function not working
Clamping plate not adjusted.
➥
Adjust the plate.
Defective clamping plate.
➥
Replace the plate.
Tyre pressure gauge needle fails to return to 0
Pressure gauge faulty or damaged.
➥
Replace the pressure gauge.
CAUTION
The “Spare parts” handbook does not authorise the user to carry out work on the machine with
the exception of those operations explicitly described in the User Manual. It only enables the
user to provide the technical assistance service with precise information, to minimise delays.
Risk of injury or death
The “Spare parts” handbook does not authorise the user to carry out work on the machine with
the exception of those operations explicitly described in the User Manual. It only enables the
user to provide the technical assistance service with precise information, to minimise delays.
CAUTION!
48
Summary of Contents for M 322
