Operator's manual
M 824
43
EN
HOISTING/
HANDLING
In order to remove the machine from the
pallet, hook it as shown in fig.3.
3
This hoisting point must be used when-
ever you need to change the installation
position of the machine. Do not attempt
to move the machine until it has been
disconnected from the electricity and
compressed air supply systems.
INSTALLATION
CLEARANCES
WARNING
The regulations in force concerning
safety at work must be complied
with when
choosing the installation
position.
IMPORTANT
: for the correct and safe
operation of the machine, the lighting
level in the place of use should be at
least 300 lux.
WARNING
If the machine is installed outdoors,
it must be properly sheltered
under
a roof.
Install the tyre changer in the chosen work
position, complying with the minimum
clearances shown in fig.4.
1000
500
750
4
Ambient conditions in the place
of operation
- Relative humidity from 30% to 95% with-
out condensation.
- Temperature range from 0°C to 50°C.
WARNING
The machine must not be operated in
potentially explosive atmosphere.
Summary of Contents for M 824
