HPA-Faip M 824, Operator'S Manual

Operator's manual 

M 824

 45

EN

A

B

C

5

SAFETY 

REGULATIONS

The equipment is intended for professional 

use only.

 WARNING

The machine may only be operated by 

one operator at a time.

 WARNING 

Failure to observe the instructions and 

danger warnings may

result in serious in-

jury to operators and any other persons 

in the vicinity. Do not start the machine 

before reading and understanding all 

the indications of danger, attention and 

warning contained in this manual.

In order to operate the machine correctly, it 

is necessary to be a qualified and authorised 

operator, able to be trained and to know the 

safety regulations. Operators are expressly 

forbidden from using the machine under 

the influence of alcohol or drugs capable 

of affecting physical and mental capacity. 

The following conditions are essential:

- Be able to read and understand all the 

information in this manual.

- Have a thorough knowledge of the capa-

bilities and features of this machine.

- Keep unauthorised persons well clear of 

the area of operations.

- Make sure that the machine has been 

installed in compliance with established 

legislation and standards.

- Make sure that all machine operators are 

suitable trained, that they are capable of 

using the machine correctly and that they 

are adequately supervised during their 

work.

- Never leave nuts, bolts, tools or other 

equipment on the machine to avoid the 

risk that they could become entrapped 

between moving parts during work.

- Do not touch power lines or the inside of 

electric motors or other electrical equip-

ment until the power has been discon-

nected and locked out.

- Read this manual carefully and learn how 

to use the machine correctly and safely.

- Always keep this operator's manual in a 

place where it can be readily consulted 

when  working  with  the  machine  and 

consult it whenever you are in need of 

confirmation or explanations.

 WARNING

Do not remove or deface the Warning, 

Caution or Instruction decals

. 

Replace 

any missing or illegible decal. If one 

or more decals have been detached or 

damaged, replacements can be obtained 

from your nearest dealer.

- When using and servicing the machine, 

observe the standardised industrial ac-

cident prevention regulations for high