110
M 830 LL - M 830 M
User Manual
1
5
- Connect the pneumatic black hose
to the tool head lifting cylinder
(fig. 4g).
3.2. HOISTING/HANDLING
To remove the machine from the
pallet connect to it by means of the
lifting bracket 1 provided, as shown
in fig. 5.
This lifting point must be used
whenever you need to change the
installation position of the machine.
Do not attempt to move the machine
until it has been disconnected from
the electricity and compressed air
supply systems.
4. INSTALLATION
For M 830 M see the manual 4-119892.
NOTICE
4.1. INSTALLATION CLEARANCES
The machine must be installed in accordance with all applicable safety regula-
tions, including but not limited to those issued by OSHA.
RISK OF EXPLOSION OR FIRE.
Never use the machine in an area where it will
be exposed to flammable vapours (gasoline, paint thinners solvents, etc.). Never
install the machine in a recessed area or below floor level.
DANGER
IMPORTANT: for the correct and safe operation of the machine, the lighting level in
the place of use should be at least 300 lux.
WARNING
Summary of Contents for M 830 LL
