128
M 830 LL - M 830 M
User Manual
- Press the button (1, Fig. 22b) and
guide the bead breaker unit during
rotation through 180° until it engages
again.
- Return the bead breaker unit to the
working position.
Breaking the bottom bead
- Apply pressure to the tyre with the
disc using control
(1, Fig. 23a).
The tyre should be pressed down by about 5 mm.
- Obtain disc penetration by keeping button
(2, Fig. 23b) pressed, start to
rotate the wheel
(3, Fig. 23b) and at the same time raise the bead breaker
disc a little at a time
(1, Fig. 23b) until the bead is completely broken (B). The rim
bead should be greased during rotation.
1
2
3
23b
- Release the penetration button
(2, Fig. 23c) and lower the disc using control
1
23a
Summary of Contents for M 830 LL
