B 215 / B 225 Evo
Operator’s manual
87
UK
After completing the wheel data update, press the
button to exit and display the
unbalance values recalculated according to the new dimensions, or to perform a wheel spin.
- if two subsequent measurements are taken inside the rim on two balancing planes, the
machine interprets the presence of a rim with balancing using a clip weight on the inner
plane and an adhesive weight on the external one (ALU 2P).
In this phase, the machine could automatically change the type of weight on the inner
plane from clip to adhesive (ALU 1P). The opera-
tor is able to change this setting by pressing the
or
key. In this case, the balanc-
ing programme switches from ALU 1P to ALU 2P
and vice versa.
12
11b
