Installing and troubleshooting
7
5. Connect the interface cable
Windows:
During the software installation, you or the installation software chose an
interface connection. For USB use the following instructions. For parallel, skip to “If
you are using parallel.”
For USB:
Connect the USB cable between the USB port on the scanner and the
USB port on the computer.
If you are using parallel:
a
Shut down the computer. If you do NOT have a printer, skip to step c.
b
Disconnect the printer parallel cable from your computer and connect it to
the parallel port on the scanner (printer icon).
c
Connect your computer to the remaining parallel port on the scanner
(computer icon) using a parallel cable.
Do NOT connect the USB cable.
Note:
If your scanner did not come with a parallel cable and you need to use a
parallel connection (you don't have USB), see the read me file for
information on how to purchase the correct parallel cable (HP part
number C9874A).
parallel port
USB port
Summary of Contents for 4400c
Page 1: ...hp scanjet 4400c series and 5400c series scanners setup and support guide ...
Page 42: ...42 Support warranty and specifications ...
Page 43: ...43 ...
Page 44: ......