background image

File <nodeID> "sr_mnt is full"

File -- "sr_mnt not mounted"

File -- "Admin Volume is not mounted"

File -- "An online upgrade is in progress"

                

file

 example 1

File   node:2    Behavior altering file "manualstartup" exists created on Oct 7 14:16

                

file

 suggested action 1

After understanding why the files are present, the file must be removed to prevent unwanted behavior. As
root on a controller node, remove the file using the UNIX 

rm

 command.

Known condition: some undesirable touch files are not being detected (bug 45661).

file

 example 2

Component -----------Summary Description----------- Qty

File      Admin Volume is not mounted         1

                

file

 suggested action 2

Each controller node has a file system link so that the admin volume can be mounted if that controller
node is the master controller node. This exception is reported if the link is missing or if the System
Manager (sysmgr) is not running at the time. For example, 

sysmgr

 might have been restarted manually,

due to error or during a change of master-nodes. If sysmgr was restarted, it tries to remount the admin
volume every few minutes.

Every controller node must have the following file system link so that the admin volume can be mounted,
if the controller node becomes the master controller node:

# onallnodes ls -l /dev/tpd_vvadmin

Node 0:

lrwxrwxrwx 1 root root 12 Oct 23 09:53 /dev/tpd_vvadmin -> tpddev/vvb/0

Node 1:

ls: /dev/tpd_vvadmin: No such file or directory

                

The corresponding alert when the admin volume is not properly mounted is as follows:

Message Code: 0xd0002

Severity    : Minor

Type        : PR transition

Message     : The PR is currently getting data from the internal drive on 

node 1, not the admin volume. Previously recorded alerts will not be visible 

until the PR transitions to the admin volume.

                

If a link for the admin volume is not present, it can be recreated by rebooting the controller node.

file

 example 3

Component -----------Summary Description----------- Qty

File      Nodes with Dump or HBA core files   1

Component ----Identifier----- ----Detailed Description------        

File      node:1              Dump or HBA core files found

                

Troubleshooting

147

Summary of Contents for 3PAR StoreServ















































































































































































Reviews: