2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1 Torx screwdriver
T9
Description #2 Static electric tweezers
NA
Description #3 Phillips screwdriver
PH2
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Use T9 screwdriver to remove the 5 screws on the chassis.
2. Will the unit,open the top cover with 60 angle.
3. Use static electric tweezers to remove the antenna cable from the main board.
4. Remove the top cover,use PH2 screwdriver to remove one screw on the PSE board
5. Remove the PSE board,use PH2 Phillips screwdriver to remove screws on main board.
6. Remove the main board from the chassis.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
