background image

©

 Copyright 2016, 2017 Hewlett Packard Enterprise Development LP

Notices

The information contained herein is subject to change without notice. The only warranties for Hewlett
Packard Enterprise products and services are set forth in the express warranty statements accompanying
such products and services. Nothing herein should be construed as constituting an additional warranty.
Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained
herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession,
use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer
Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government
under vendor's standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard
Enterprise has no control over and is not responsible for information outside the Hewlett Packard
Enterprise website.

Acknowledgments

Intel

®

, Itanium

®

, Pentium

®

, Intel Inside

®

, and the Intel Inside logo are trademarks of Intel Corporation in

the United States and other countries.

Microsoft

®

 and Windows

®

 are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

Adobe

®

 and Acrobat

®

 are trademarks of Adobe Systems Incorporated.

Java

®

 and Oracle

®

 are registered trademarks of Oracle and/or its affiliates.

UNIX

®

 is a registered trademark of The Open Group.

Linux

is the registered trademark of Linus Torvalds in the U.S. and other countries.

SD

 and microSD

are trademarks or registered trademarks of SD-3C in the United States, other

countries or both.

NVIDIA

is a trademark of NVIDIA Corporation in the U.S. and other countries.

In mid 2017, Hewlett Packard Enterprise decided to re-brand the HPE EL20 Intelligent Gateway

to the following:

HPE IoT Gateway GL20

Some documentation and, labeling, or both might reference the following while HPE evaluates the
rebrandof the HPE IoT Gateway product line:

• Edgeline EL20
• Edgeline
• EL20

Summary of Contents for Edgeline EL20





















































Reviews: