124
Use
undo sntp reliable authentication-keyid
to remove the specified trusted key.
Syntax
sntp reliable authentication-keyid
keyid
undo sntp reliable authentication-keyid
keyid
Default
No trust key is specified.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
keyid
: Specifies an authentication key number in the range of 1 to 4294967295.
Usage guidelines
If SNTP is enabled, the SNTP client is synchronized only to an NTP server that provides a trusted
key.
Before you use the command, make sure SNTP authentication is enabled and an authentication key
is configured. The key automatically changes to untrusted after you delete the key. In this case, you
do not need to execute the
undo sntp-service reliable authentication-keyid
command.
Examples
# Enable NTP authentication, and specify the MD5 encryption algorithm, with the key ID of 37 and
key value of
BetterKey
.
<Sysname> system-view
[Sysname] sntp authentication enable
[Sysname] sntp authentication-keyid 37 authentication-mode md5 BetterKey
# Specify this key as a trusted key.
[Sysname] sntp reliable authentication-keyid 37
Related commands
sntp authentication-keyid
sntp authentication enable
sntp unicast-server
Use
sntp unicast-server
to specify an NTP server for the device.
Use
undo sntp unicast-server
to remove the NTP server.
Syntax
sntp unicast-server
{
server-name
|
ip-address
} [
vpn-instance
vpn-instance-name
]
[
authentication-keyid
keyid
|
source
interface-type interface-number
|
version
number
] *
undo sntp unicast-server
{
server-name
|
ip-address
} [
vpn-instance
vpn-instance-name
]
Default
No NTP server is specified for the device.
