180
undo snmp-agent context
context-name
Default
No SNMP context is configured on the device.
Views
System view
Predefined use roles
network-admin
mdc-admin
Parameters
context-name
: Specifies an SNMP context, a case-sensitive string of 1 to 32 characters.
Usage guidelines
An NMS and an SNMP agent can communicate with each other if the following conditions exist:
•
No SNMP context is configured on the NMS and the SNMP agent.
•
The NMS and the SNMP agent use the same SNMP context.
Otherwise, a timeout message appears, indicating a communication failure between the NMS and
SNMP agent.
You can create a maximum of 20 SNMP contexts.
Examples
# Create SNMP context
trillcontext
.
<Sysname> system-view
[Sysname] snmp-agent context ospfcontext
Related commands
display snmp-agent context
snmp-agent group
Use
snmp-agent
group
to create an SNMP group and specify its access right.
Use
undo
snmp-agent group
to delete an SNMP group.
Syntax
SNMPv1 and SNMP v2c:
snmp-agent
group
{
v1
|
v2c
}
group-name
[
read-view
view-name
] [
write-view
view-name
]
[
notify-view
view-name
] [
acl
acl-number
|
acl
ipv6
ipv6-acl-number
] *
undo
snmp-agent
group
{
v1
|
v2c
}
group-name
SNMPv3 (high encryption in non-FIPS mode):
snmp-agent
group
v3
group-name
[
authentication
|
privacy
] [
read-view
read-view
]
[
write-view
write-view
] [
notify-view
notify-view
] [
acl
acl-number
|
acl
ipv6
ipv6-acl-number
] *
SNMPv3 (high encryption in FIPS mode):
snmp-agent
group
v3
group-name
{
authentication
|
privacy
} [
read-view
read-view
]
[
write-view
write-view
] [
notify-view
notify-view
] [
acl
acl-number
|
acl
ipv6
ipv6-acl-number
] *
undo
snmp-agent
group
v3
group-name
[
authentication
|
privacy
]
