manualshive.com logo in svg

HPE FlexNetwork 7500 Series, Network Management And Monitoring Command Reference

The HP FlexNetwork 7500 Series is a cutting-edge networking product designed for seamless communication. Enhance your network's performance with our comprehensive Configuration Manual, available for free download at 88.208.23.73:8080. This manual provides detailed instructions and enables you to maximize the potential of your HP FlexNetwork 7500 Series.

Share
Download
background image

 

220 

addition, subtraction, multiplication, and division on these variables. To get a correct calculation 
result, make sure the following conditions are met: 

•

 

The values of the variables in the formula are positive integers.  

•

 

The result of each calculating step is in the value range for long integers. 

prialarm-des

: Configures an entry description, a case-sensitive string of 1 to 127 characters. 

sampling

-

interval

: Sets the sampling interval in the range of 10 to 65535 seconds. 

absolute

: Specifies absolute sampling. RMON compares the value of the variable with the rising and 

falling thresholds at the end of the sampling interval.

 

delta

: Specifies delta sampling. RMON subtracts the value of the variable at the previous sample 

from the current value, and then compares the difference with the rising and falling thresholds. 

startup-alarm

: Specifies alarms that can be generated when the alarm entry becomes valid. If you 

do not specify an alarm, RMON does the following: 

•

 

Generates a rising alarm if the first sample crosses the rising threshold.  

•

 

Generates a falling alarm if the first sample crosses the falling threshold. 

rising

: Generates a rising alarm if the first sample after the entry becomes valid is greater than or 

equal to the rising threshold. 

falling

: Generates a falling alarm if the first sample after the entry becomes valid is less than or equal 

to the rising threshold. 

rising-falling

: Generates a rising alarm or falling alarm if the first sample after the entry becomes 

valid crosses the rising threshold or falling threshold. 

rising-threshold

 

threshold

-

value1

 

event

-

entry1

: Sets the rising threshold. The 

threshold-value1

 

argument represents the rising threshold in the range of –2147483648 to +2147483647. The 

event-entry1

 argument represents the index of the event that is triggered when the rising threshold is 

crossed. The value range for the 

event-entry1 

argument is 0 to 65535. If 0 is specified, the alarm 

does not trigger any event. 

falling-threshold

 

threshold

-

value2

 

event

-

entry2

: Sets the falling threshold. The 

threshold

-

value2

 

argument represents the falling threshold in the range of –2147483648 to +2147483647. The 

event

-

entry2

 argument represents the index of the event that is triggered when the falling threshold 

is crossed. The value range for the 

event

-

entry2 

argument

 

is 0 to 65535. If 0 is specified, the alarm 

does not trigger any event.

 

forever

: Configures the entry as a permanent entry. RMON retains a permanent private alarm entry 

until it is manually deleted. 

cycle 

cycle

-

period

: Sets the lifetime of the entry, in the range of 0 to 4294967 seconds. RMON 

deletes the entry when its lifetime expires. 

owner

 text

: Specifies the entry owner, a case-sensitive string of 1 to 127 characters. 

Usage guidelines 

Before you can create RMON private alarm entries, you must enable the SNMP agent. 

You can create a maximum of 50 private alarm entries. 

Each alarm entry must have a unique alarm variable, sampling interval, sample type, rising threshold, 
or falling threshold. You cannot create an alarm entry if all these parameters for the entry are the 
same as an existing entry. 

To trigger the event associated with an alarm condition, you must create the event with the 

rmon 

event

 command. 

The RMON agent samples variables and takes an alarm action based on a private alarm entry as 
follows: 

1. 

Periodically samples the variables specified in the private alarm formula. 

2. 

Processes the sampled values with the formula. 

Summary of Contents for FlexNetwork 7500 Series















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FlexNetwork 7500 Series

Watchguard AP200 Setup Manual preview
AP200
Brand: Watchguard Pages: 40
IBM AS/400 Hardware User Manual preview
AS/400
Brand: IBM Pages: 104
IBM System Storage TS3100 Setup, Operator, And Service Manual preview
System Storage TS3100
Brand: IBM Pages: 375
MicroNet BroadLink SP3353 Installation Manual preview
BroadLink SP3353
Brand: MicroNet Pages: 66
ADC PG-FlexPlus AMU-912 Manual preview
PG-FlexPlus AMU-912
Brand: ADC Pages: 130
IBM totalstorage 200 Service Manual preview
totalstorage 200
Brand: IBM Pages: 180
NA DigiNet 416 User Manual preview
DigiNet 416
Brand: NA Pages: 22
VCS VideoJet 100 Manual preview
VideoJet 100
Brand: VCS Pages: 118
IDT Tsi310TM User Manual preview
Tsi310TM
Brand: IDT Pages: 207
Ace ADSL2+ Wireless MIMO Router User Manual preview
ADSL2+ Wireless MIMO Router
Brand: Ace Pages: 64
ZyXEL Communications P-335U Specifications preview
P-335U
Brand: ZyXEL Communications Pages: 2
Quidway S3000-EI Series Operation Manual preview
S3000-EI Series
Brand: Quidway Pages: 16
Comtrend Corporation WAP-5922MP Quick Install Manual preview
WAP-5922MP
Brand: Comtrend Corporation Pages: 4
Linksys PLK300 Quick Installation Manual preview
PLK300
Brand: Linksys Pages: 6
MaxComm M-150 Manual preview
M-150
Brand: MaxComm Pages: 10
iNetVu Tachyon CI1300 Quick Start Manual preview
Tachyon CI1300
Brand: iNetVu Pages: 20
Fluke Network Tester User Manual preview
Network Tester
Brand: Fluke Pages: 102
Amer.com 8-Port 10/100Mbps Fast Ethernet Switch User Manual preview
8-Port 10/100Mbps Fast Ethernet Switch
Brand: Amer.com Pages: 14

Brands by name

Popular brands

Load more brands