352
Field Description
Port
sFlow collector port.
Aging
Remaining lifetime of the sFlow collector. If this field displays N/A, the sFlow
collector never ages out.
Size
Maximum length of the sFlow data portion in an sFlow packet.
VPN-instance
Name of the VPN bound with the sFlow collector.
Description
Description of the sFlow collector.
Port information
Information about interfaces configured with sFlow.
Interface
Interface configured with sFlow.
CID
ID of the sFlow collector, for receiving counter sampled packets. If no sFlow
collector ID is specified, this field displays 0.
Interval(s) Counter sampling interval, in seconds.
FID
ID of the sFlow collector for receiving flow sampled packets. If no sFlow
collector ID is specified, this field displays 0.
MaxHLen
Maximum number of bytes that can be copied in a sampled packet (starting
from the packet header).
Rate
Number of packets out of which the interface samples a packet by using flow
sampling.
Mode
Flow sampling mode:
•
Determine
—Samples a fixed number of packets.
•
Random
—Samples a random number of packets.
Status
sFlow status of the port:
•
Suspended
—The sFlow feature is suspended because the port is down.
•
Active
—The sFlow feature is active because the port is up.
sflow agent
Use
sflow agent
to configure an IP address for the sFlow agent.
Use
undo sflow agent
to restore the default.
Syntax
sflow agent
{
ip
ip-address
|
ipv6
ipv6-address
}
undo sflow agent
{
ip
|
ipv6
}
Default
No IP address is configured for the sFlow agent. The switch periodically identifies whether the sFlow
agent has an IP address. If it does not, the switch automatically selects an IPv4 address for the
sFlow agent. It does not save the IPv4 address in the configuration file.
Views
System view
Predefined user roles
network-admin
mdc-admin
