388
Syntax
security-logfile save
Views
Any view
Predefined user roles
security-audit
Usage guidelines
The system clears the security log file buffer after saving security logs to the security log file
automatically or manually.
A local user can use this command only after being authorized as the security log administrator by
the system administrator. For more information about security log administrator, see
Security
Configuration Guide
.
Examples
# Manually save the security logs in the security log file buffer to the security log file.
<Sysname> security-logfile save
The contents in the security log file buffer have been saved to the file
flash:/seclog/seclog.log.
Related commands
info-center security
-
logfile directory
authorization-attribute
(
Security Command Reference
)
terminal debugging
Use
terminal debugging
to enable the display of debug information on the current terminal.
Use
undo terminal debugging
to disable the display of debug information on the current terminal.
Syntax
terminal debugging
undo terminal debugging
Default
The display of debug information is disabled on the current terminal.
Views
User view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
To enable the display of debug information on the console, perform the following operations:
1.
Execute the
terminal debugging
command.
2.
Enable the information center (enabled by default).
3.
Use a debugging command to enable the related debugging.
To enable the display of debug information on the current terminal, perform the following operations:
4.
Execute the
terminal monitor
and
terminal debugging
commands.
