88
Local mode: sym_active, local poll interval: 6
Peer mode: unspec, peer poll interval: 10
Offset: 0.0000ms, roundtrip delay: 0.0000ms, dispersion: 15937ms
Root roundtrip delay: 0.0000ms, root dispersion: 0.0000ms
Reachabilities:0, sync distance: 15.938
Precision: 2^10, version: 4, source interface: Not specified
Reftime: 00000000.00000000 Thu, Feb 7 2036 6:28:16.000
Orgtime: d17cbb21.0f318106 Tue, May 17 2011 9:15:13.059
Rcvtime: 00000000.00000000 Thu, Feb 7 2036 6:28:16.000
Xmttime: 00000000.00000000 Thu, Feb 7 2036 6:28:16.000
Roundtrip delay samples: 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Offset samples: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Filter order: 0 1 2 3 4 5 6 7
Total sessions: 1
Table 14 Command output
Field Description
Clock source
IPv6 address of the clock source. If this field displays
::
, the IPv6
address of the NTP server has not been resolved successfully.
Clock stratum
Stratum level of the NTP server, which determines the clock
precision. The value is in the range of 1 to 16. A lower stratum
level represents higher clock accuracy. A stratum 16 clock is not
synchronized and cannot be used as a reference clock.
Clock status
Status of the clock source corresponding to this association:
•
configured
—The association was created at the CLI.
•
dynamic
—The association is established dynamically.
•
master
—The clock source is the primary reference source of
the current system.
•
selected
—The clock source has survived the clock selection
algorithm.
•
candidate
—The clock source is the candidate reference
source.
•
sane
—The clock source is available for this association.
•
insane
—The clock source is not available for this
association.
•
valid
—The clock source is valid, which means the clock
source meets the following requirements: it has passed the
authentication and is being synchronized. Its stratum level is
valid, and its root delay and root dispersion values are within
their ranges.
•
invalid
—The clock source is invalid.
•
unsynced
—The clock source has not been synchronized or
the value of the stratum level is invalid.
Reference clock ID
•
If the reference clock is the local clock, the value of this field
is related to the value of the Clock stratum field:
{
When the value of the Clock stratum field is 0 or 1, this
field displays
Local
.
{
When the Clock stratum field has another value, this field
displays the MD5 digest value of the first 32 bits of the
IPv6 address. The MD5 digest value is in dotted decimal
format.
•
If the reference clock is the clock of another device on the
network, this field displays the MD5 digest value of the first
