5
LED Status
Description
PoE output port
LED
Steady green
A link is present (no PoE).
Steady amber
A link is present (PoE).
Flashing green
The port is sending or receiving data (no
PoE).
Flashing amber The port is sending or receiving data (PoE).
Slow flashing
amber
The PoE power supply is faulty.
Off
No link is present.
Uplink port LED
Steady green
A link is present.
Flashing green
The port is sending or receiving data.
Off
No Link is present.
Management
mode LED
On
The switch is operating in managed mode.
Off
The switch is operating in unmanaged
mode.
▌
Installing the switch
The switch is designed to be mounted on a standard NEMA-WD6 (US) or BS 4662
(International) in-wall electrical outlet box.
You can also install the switch by using the optional HPE unified wired-WLAN
walljack table/flush wall mount kit (JL022A). This kit, which is purchased separately,
lets you install the switch on a horizontal surface or wall.
Restrictions and guidelines
This equipment must be installed in compliance with local and national building
codes, regulatory restrictions, and FCC rules. For the safety of people and equipment,
only professional network personnel should install the device.
To avoid possible bodily injury or equipment damage, read the following safety
recommendations before you install the switch. The recommendations do not cover
every possible hazardous condition.
•
Install with six inches or more of clearance around the device.
•
Keep the device clean and dust-free.
•
Make sure the ground is dry and flat and anti-slip measures are in place.
•
Do not place the device in a moist area and avoid liquid surrounding the device.
