QuickSpecs
HPE ProLiant MicroServer Generation 8 (Gen8)
Technical Specifications
Page 25
System Unit
Dimensions
(H x W x D)
(with feet)
9.15 x 9.06 x 9.65 in (23.24x 23 x 24.5 cm)
Weight
(approximate)
Maximum
(all hard drives, power supply
and processor installed)
21.60 lb (9.8 kg)
Minimum
(one hard drive, power supply,
and processor installed)
15.13 lb (6.8 kg)
Input Requirements
(per power supply)
Rated Line Voltage
100 -- 127 VAC,
200 - 240 VAC
Rated Input Current
3.5 A (at 110 VAC),
2 A (at 200 VAC)
Rated Input Frequency
50 to 60 Hz
Rated Input Power
For 150W Power Supply
192 W (at 100 VAC),
185 W (at 200 VAC)
For 200W Power Supply
243 W (at 100 VAC),
237 W (at 200 VAC)
BTU Rating
Maximum
For 150 W Power Supply
682 BTU/hr (at 100 VAC),
665 BTU/hr (at 200 VAC)
For 200 W Power Supply
838.86 BTU/hr (at 100 VAC),
825.22 BTU/hr (at 200 VAC)
Power Specifications
To review typical system power ratings use the Power Advisor which is
available via the online tool located at URL:
http://www.hp.com/go/hppoweradvisor
Power Supply Output
(per power supply)
Rated Steady-State Power
For 150 W Power Supply
150 W (at 100 VAC),
150 W (at 200 VAC)
For 200 W Power Supply
200 W (at 100 VAC),
200 W (at 200 VAC)
Maximum Peak Power
For 150 W Power Supply
150 W (at 100 VAC),
150 W (at 200 VAC)
For 200 W Power Supply
200 W (at 100 VAC),
200 W (at 200 VAC)
System Inlet
Temperature
Operating
10° to 35°C (50° to 95°F) at sea level with
an altitude derating of 1.0°C per every 305
m (1.8°F per every 1000 ft) above sea level
to a maximum of 3050 m (10,000 ft), no
direct sustained sunlight. Maximum rate of