Elliptical Cross
-
Trainer
&
Exercise Bike
11
Troubleshooting
Changing the Batteries
1. To change the computer batteries, please slide the computer from the computer holder, remove the battery
cover on the back of the computer console, and remove the batteries.
2. Replace with 2 x AA batteries.
3. Finally, put the cover back on the console, and slide the computer back onto the computer holder.
Computer Not Working Correctly
1. If your computer is not working correctly, please check whether the computer sensor wire is plugged into the
computer.
2. If you have checked the above and the computer is still not working, then please make sure that the
batteries are still working and that they are installed correctly in the computer.
No Resistance
1. If there is no tension resistance, please turn the tension adjustment knob to its lowest level, and then go to
the friction belt buckle which is located on top of the fan wheel beneath the centre beam.
2. Loosen the friction belt, pull it through the buckle until you can feel some resistance on the belt, and then
lock it back around the buckle.
3. Now mount your Aero Elliptical Strider and turn the pedals.
4. If you find it is now too tight, go back to the friction belt buckle and loosen the belt slightly.
