A
Clock Mode - Setting the Clock
B
Program Mode – Navigating Program Mode
(i) Is it Standard or Daylight Savings Time? In
Clock Mode press RCL to change to Summer
Time – the display will show +1h. Press RCL
again to return to Standard time.
(ii) Press and hold OK until the days of the week
at the top of the display flash.
(iii) Use the UP and DOWN buttons to set the day
of the week.
(iv) Press OK to confirm – the hour display will flash.
(v) Use the UP and DOWN buttons to set the
current hour (in standard time).
(vi) Press OK to confirm – the minute display will flash.
(vii) Use the UP and DOWN buttons to set the minutes.
(viii) Press OK to confirm.
(ix) Press MENU to finish.
Change to Program Mode – press MENU once from
Clock Mode or twice from Countdown Mode.
The number 1 and word ON will flash, meaning you
are looking at the 1st Program ON time.
If no days are shown and the time is --:--:-- this
means no time has been set.
Press RCL to delete a programmed time. To restore
a deleted time press RCL again.
MENU
MENU
RCL
RCL
(ix)
(v), (vii)
(iii)
(vi), (viii)
(ii), (iv)
(i)
UP &
UP &
OK
OK
DOWN
DOWN
Hint: If you only want to change the day or hour, you can exit setting the clock
at any time by pressing MENU.
Press the UP button to change the display – now the number 1 and word OFF
will flash, meaning you are looking at the 1st Program OFF time. Use the UP
and DOWN buttons to scroll through the timer settings.
