HQLE10050
V. 01
–
06/01/2021
8
©Velleman nv
•
Familiarise yourself with the functions of the device before actually
using it.
•
Always make sure to connect the device to an alternating current
matching the value stated on the device.
•
Always install the device in a well-ventilated location.
•
Keep this device away from dust and extreme temperatures. Make
sure the ventilation openings are clear at all times. For sufficient
air circulation, leave at least 2.5 cm in front of the openings.
•
Never carry or move the device from the power cord or any other
moving part. Always use the bracket.
•
In the event of an operating problem, stop using the device
immediately.
•
This device is not designed for permanent operation: regular
operation breaks will prolong its live.
3.
General Guidelines
•
Refer to the Velleman
®
Service and Quality Warranty on the last pages of this manual.
•
All modifications of the device are forbidden for safety reasons. Damage caused by user
modifications to the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthorised way will
void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any ensuing defects or problems.
•
Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary,
incidental or indirect)
–
of any nature (financial, physical…) arising from the possession,
use or failure of this product.
•
Keep this manual for future reference.
4.
Installation
4.1
General Guidelines
WARNING
Minimum distance from lighted objects: 0.5 m.
•
Have the device installed by a qualified person, respecting all applicable norms.
•
Install the device on an even, fire-resistant, scratch-resistant, water-resistant and non-
slippery surface.
•
The carrying construction must be able to support 10 times the weight of the device for
1 hour without deforming.
•
Make sure there is no flammable material within a 1 m radius of the device.
•
Install the device in a location with few passers-by that is inaccessible to unauthorised
persons.
•
Install the device in a location where you can easily access the power cord.
