background image

VDP250SC6

 21  VELLEMAN 

Signal internationaler Standard DMX512 
 

Verwenden Sie dieses Gerät nur mit originellen Zubehörteilen. Velleman nv übernimmt keine Haftung für 
Schaden oder Verletzungen bei (falscher) Anwendung dieses Gerätes. Alle Änderungen ohne vorherige 
Ankündigung vorbehalten

 

© URHEBERRECHT 
Velleman nv besitzt das Urheberrecht für diese Bedienungsanleitung. Alle weltweiten Rechte vorbehalten. 

Ohne vorherige schriftliche Genehmigung des Urhebers ist es nicht gestattet, diese Bedienungsanleitung ganz oder 
in Teilen zu reproduzieren, zu kopieren, zu übersetzen, zu bearbeiten oder zu speichern. 
 
 

 

Velleman

®

 Service and Quality Warranty 

Velleman

®

 has over 35 years of experience in the electronics world and distributes its products in 

more than 85 countries. 
All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure 
the quality, our products regularly go through an extra quality check, both by an internal quality 
department and by specialized external organisations. If, all precautionary measures 
notwithstanding, problems should occur, please make appeal to our warranty (see guarantee 
conditions). 

General Warranty Conditions Concerning Consumer Products (for EU): 

• All consumer products are subject to a 24-month warranty on production flaws and defective 
material as from the original date of purchase. 
• Velleman

®

 can decide to replace an article with an equivalent article, or to refund the retail value 

totally or partially when the complaint is valid and a free repair or replacement of the article is 
impossible, or if the expenses are out of proportion. 
You will be delivered a replacing article or a refund at the value of 100% of the purchase price in 
case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article 
at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw 
occurred in the second year after the date of purchase and delivery. 

• Not covered by warranty: 

- all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, 
dust, dirt, humidity...), and by the article, as well as its contents (e.g. data loss), compensation for 
loss of profits; 
- frequently replaced consumable goods, parts or accessories such as batteries, lamps, rubber parts, 
drive belts... (unlimited list); 
- flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.; 
- flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, 
abusive use or use contrary to the manufacturer’s instructions; 
- damage caused by a commercial, professional or collective use of the article (the warranty validity 
will be reduced to six (6) months when the article is used professionally); 
- damage resulting from an inappropriate packing and shipping of the article; 
- all damage caused by modification, repair or alteration performed by a third party without written 
permission by Velleman

®

• Articles to be repaired must be delivered to your Velleman

®

 dealer, solidly packed (preferably in 

the original packaging), and be completed with the original receipt of purchase and a clear flaw 
description. 
• Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused 
by obvious causes prior to presenting the article for repair. Note that returning a non-defective 
article can also involve handling costs. 
• Repairs occurring after warranty expiration are subject to shipping costs. 
• The above conditions are without prejudice to all commercial warranties. 
The above enumeration is subject to modification according to the article (see article’s manual).

 

 

Velleman

®

 service- en kwaliteitsgarantie 

Velleman

®

 heeft ruim 35 jaar ervaring in de elektronicawereld en verdeelt in meer dan 85 landen. 

Al onze producten beantwoorden aan strikte kwaliteitseisen en aan de wettelijke bepalingen geldig 
in de EU. Om de kwaliteit te waarborgen, ondergaan onze producten op regelmatige tijdstippen een 
extra kwaliteitscontrole, zowel door onze eigen kwaliteitsafdeling als door externe gespecialiseerde 

Summary of Contents for SPACE 250 ELC

























Reviews: