background image

VDPL300D

 

HQPOWER™ 

5

You can use the same starting address for a whole group of devices or enter an individual one for 
every device. 

When all devices have the same address, all the 

VDPL300D

s will “listen” to the control signal on 

one particular channel. In other words: changing the settings of one channel will affect all devices 

simultaneously. If you set different addresses, each device will “listen” to a separate channel 
number. Changing the settings of one channel will only affect the device in question. 

In the case of the 8-channel 

VDPL300D

, you will have to set the start address of the first 

VDPL300D

 to 1, the second 

VDPL300D

 to 9 (1 + 8), the third to 17 (9 + 8) and so on. 

 

8. Cleaning 

and 

Maintenance 

 

1. All screws should be tightened and free of corrosion. 
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, 

suspension, trussing) should not be deformed, modified or tampered with e.g. do not drill extra 
holes in mounting supports, do not change the location of the connections. 

3. Moving mechanic parts must not show any signs of wear and tear. 

4. The electric power supply cables must not show any damage. Have a qualified technician 

maintain the device. 

5. Disconnect the device from the mains prior to maintenance activities. 
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents. 

7. There are no user-serviceable parts. 
8. Contact your dealer for spare parts if necessary. 

 

9. Technical 

Specifications 

 

Power Supply 

230VAC/50Hz 

Power Consumption 

24W 

Fuse 

F2A, 250VAC (5 x 20mm) (order code 

FF2N

DMX Connection 

3-pin XLR 

LEDs 

90 (30 x red, 30 x green, 30 x blue) 

Dimensions 

300 x 382 x 187mm 

Total Weight 

1.8kg 

Max. Ambient Temperature 

40°C 

Max. Housing Temperature 

60°C 

 

Use this device with original accessories only. Velleman Components nv cannot be held 

responsible in the event of damage or injury resulted from (incorrect) use of this device. 
For more info concerning this product, please visit our website www.hqpower.com. The 

information in this manual is subject to change without prior notice. 

 
© 

COPYRIGHT NOTICE

 

This manual is copyrighted. 

The copyright to this manual is owned by Velleman Components 

nv.

 All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or 

reduced to any electronic medium or otherwise without the prior written consent of the copyright 
holder.  
 

Summary of Contents for VDPL300D






Reviews: