11
HT130003 / HT130042
HT130030 / HT130043
User Manual
CorTemp
®
Data Recorder v4.3
9001 Series
A.12. Initializing the Data Recorder
Initializing will clear the recorder memory of all collected temperature / heart rate data, clear
all sensor Serial / Calibration #s, and restore all default parameters. (Refer to
Appendix 4:
Default Parameters
).
NOTE: Always remember to download any collected data prior to initializing. Any
data not downloaded will be permanently lost.
To initialize the recorder, do the following:
1. From
EXIT / STBY
mode, press
MENU
.
2. Press
READ
until the
INITIALIZE / CLEAR DATA
screen displays.
3. Press
F1
to
INITIALIZE
. The following screen will display:
4. Press
F1
to initialize recorder. To cancel, press
F2
.
5. Press
ENTER
to return to
EXIT / STBY
mode.
A.13. Clearing Data
Clearing data will clear the recorder memory of all collected temperature / heart rate data.
Clearing data will
NOT
clear sensor Serial / Calibration #s or programmed parameters.
NOTE: Always remember to download any collected data prior to clearing data. Any
data not downloaded will be permanently lost.
To clear data from the recorder, do the following:
1. From
EXIT / STBY
mode, press
MENU
.
2. Press
READ
until the
INITIALIZE / CLEAR DATA
screen displays.
CorTemp
®
CorTemp
®
CorTemp
®
