MAINTENANCE
3-5
Tap the inner filter (1) lightly several times on a hard
surface to remove excess dirt or blow compressed air
lightly (207 kPa (2.11 kgf/cm
2
, 30 psi) or less) through
the paper filter from the inside out. Never try to brush
the dirt off; brushing will force dirt into the fibers.
Wipe dirt from the inside of the air cleaner case,
element holder and air cleaner cover using a rag.
Install the inner filter to the air cleaner case and
element holder.
Install the outer filter on the element holder.
Install the air cleaner cover.
AIR CLEANER REPLACEMENT
Remove the air cleaner cover (page 3-4).
Remove the outer filter, element holder and inner filter
(page 3-4).
Wipe dirt from the inside of the air cleaner case,
element holder and air cleaner cover using a rag.
Install new air cleaner filters and element holder.
Install the air cleaner cover.
SPARK PLUG CHECK/ADJUSTMENT
Remove the spark plug cap (1), and then remove the
spark plug (2) using a spark plug wrench (3).
Visually check the spark plug. Replace the plug if the
insulator (1) is cracked, chipped, or heavily fouled.
Remove carbon or other deposits with wire brush.
Check the sealing washer (2) for damage.
Replace the spark plug if the sealing washer is
damaged (page 3-6).
(1)
If the engine has been running, the engine will be
very hot.Allow it to cool before proceeding.
(2)
(1)
(3)
(2)
(1)
62Z6P000.book 5 ページ ２００９年７月９日 木曜日 午後１時３５分
