14
© 2018
– HRMTEC – www.hrmtec.com
v1.6e
3.1.4
Insert Printing Foil
NOTE:
use only original high-tech premium printing foils from HRMTEC. Third party foils
can damage your embossing machine (print head and / or motors). Such damage is
excluded from the product warranty.
First, make sure that the foil is mounted on the carrier roll so that the material is at the
top, which should ultimately appear on the ribbon. For example, the gold foil must have
the golden part at the top while the yellow part looks towards the ribbon.
The foil is passed around the pulley, then under the print head and is attached to the
waste roll (direction of rotation from front to inside).
The foil should be held with little adhesive tape on the waste roll.
Note: when changing the foil, the ribbon may remain inserted. For example, if the same
ribbon should be printed with different colors (for example gold on white ribbon and
black on white ribbon).
3.1.5
Verification
Make sure that the
ribbon is centered
and easy to run through the system without
wrinkles. Make sure that the
printing foil is centered
, well secured to the waste roll,
and easy to run through the system without wrinkles. This can be easily checked by
pressing the button 7 "Fix" (see
Error! Reference source not found.
).
