HRS AP105, Instruction Manual

v

Safety instructions

Basic safety instructions

1.  Be sure to read this Instruction Manual and all the instructions and other materials supplied with the unit 

as accessories.  Save this Instruction Manual and make it available for review whenever necessary.

Safety device and warning labels

1.  To avoid possible accidents due to lack of the safety device, be sure to operate the machine after 

ascertaining that the safety device is properly installed at the predetermined position.  Refer to page vi 

for detailed description of the safety device.

2.  Once the safety device is detached from the machine, replace it to its original position and check to be 

sure that it properly functions.

Application

1.  This machine shall only be used for its originally intended purpose while following the instructions 

specified in this Instruction Manual.

2.  Modifications to this machine is prohibited.  We assume no responsibility for accidents resulting from 

modifications.

Training

1.  To prevent possible accidents caused by unfamiliarity with the operation of the machine, the machine 

shall only be allowed to be used by the operators who have been trained for proper operation and 

provided with sufficient knowledge of safe operation by the employee.  For this purpose, the employer 

shall establish a training plan and implement it for the operators beforehand.

Working wear

1.  To protect against possible accidents resulting in personal injury by your cloths being caught in the 

machine, be sure wear a work uniform and securely fasten buttons on the sleeve cuffs and close the 

zipper on the top center plait of the uniform, if any. Avoid wearing loosely fitted clothing.

2.  The operator should fasten hair securely to avoid his/her hair from being caught in the machine.

3.  The operator should wear close toe, rubber sole shoes.

Safety instructions in each category of work following the 

delivery of the machine

Transportation

1.  The machine shall be moved in such a way that secures safety avoid falling and dropping. 

2.  To protect against unexpected accidents or drop accidents, the machine shall be repackaged, if necessary, to 

achieve the originally delivered state or better.  Prior to repackaging, wipe off oil gathering on the machine.

Unpacking

1.  The machine is shipped in a corrugated cardboard box.  Be sure to take the machine out from the box 

while cautiously avoiding dropping the machine.

Lubrication

1.  Use oil of the kind designated by us or an equivalent for the machine.

2.  In the event that oil should get in your eye or contact your skin, immediately wash to remove it to protect 

against irritations and rashes.

3.  In the event that you should swallow oil by mistake, immediately consult a doctor to prevent diarrhea and 

emesis.

Maintenance

1.  To prevent possible accidents caused by unfamiliarity with the operation of the machine, repair and 

adjustment of the machine shall be conducted only by maintenance personnel who have a full knowledge 

of the machine.  Any repair and adjustment beyond the range covered by the instructions given in this 

Instruction Manual is prohibited.  We assume no responsibility for accidents caused by improper repair 

or adjustment or the use of non-genuine part(s).

2.  To protect against personal injury, check to be sure that screws and nuts are not loosened after the 

completion of repair/adjusting works and replacement of parts.

3.  Periodically clean the machine as long as it is commissioned.  To prevent possible accidents caused by 

abrupt start of the machine during cleaning, be sure disconnect the machine prior to cleaning.

4.  In the event that your machine fails to perform normally after repair or adjusting immediately stop 

operation and contact us for service so as to protect against personal injury.

CAUTION