14
FH67 Series
●
0.5mm Pitch, 3.57mm depth One Action Lock, Vertical connection FPC/FFC/Shield FFC connector
[Operation Method]
5. How to remove the FPC
After releasing the lock lever, remove the FPC vertically from the board side. (Example 20)
When removing the FPC do not press the lock lever. (Example 21)
The released lock lever is designed to close automatically at the time of FPC release. However if it does not
please close the lock with your finger. (Example 22)
[Caution]
· Do not pull out FPC while the lever is locked. (Example 23)
There is a possibility of decrease in the FPC's retention force after forcefully removing the FPC.
· This connector is equipped with the FPC retention mechanism by means of the lock lever.
When pulling out FPC, do not apply load in any direction other than vertical to the board side. (Example 24)
Lock lever (open)
Lock lever (close)
Lock lever (close)
FPC (diagonal)
FPC (diagonal)
Lock lever (open)
Vertical
direction
Automatically returns
simultaneously at the
same time as FPC removal
(Example 22)
NG
NG
NG
NG
(Example 21)
(Example 23)
(Example 24)
(Example 20)
OK
―
Condition after FPC is pulled out
―
Sep.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
