TITLE
:
GT50 Series Guideline
REVISION DATE
:
HIROSE ELECTRIC CO.,LTD.
OBJECT
PRODUCT
:
GT50 SERIES
Figure number
ETAD-T0931-00
PAGE:
3
OF
13
1.
Introduction
1.1 Purpose of this Guideline
The GT50 series guidelines are intended to provide information on precautions regarding
equipment design and work regarding the product features and handling methods of GT50.
These guidelines are intended to provide general information and do not limit your design or
guarantee results under all circumstances.
If you do not meet these guidelines, please contact us individually.
In addition, the photos and illustrations shown are those of our representative products,
so they may differ depending on the product.
The guideline information is subject to change without notice.
2. Safety Precautions and Environmental Conditions
2.1 Safety Precautions
Before using (operation / maintenance / inspection), please read all the precautions and operation
guideline to ensure correct use.
In this GT50 series guideline, the rank of safety precautions is classified as "WARNING"/"CAUTION".
■Meaning of "WARNING" and "CAUTION"
WARNING
Indicates a dangerous situation such as a fire, or the contents
that may cause death or serious injury
if mishandled.
CAUTION
Indicates the contents that may cause minor injury or
property damage
if mishandled.
・
Be sure to turn off the power before connecting or disconnecting the connector, as there is a
risk of electric shock or damage.
・
Do not touch the conductive parts. There is a risk of electric shock.
・
Do not use with a voltage or current that exceeds the rating. It may cause fire or electric
shock.
・
Do not use contacts other than those specified. There is a risk of poor contact and ignition.
・
If the contact is deformed or has a large scratch, stop using it. It may cause poor contact
and ignition.
Please carry out the wiring work according to our wiring procedure manual. If the wiring
method is incorrect, there is a risk of poor continuity, ignition or damage.
WARNING
Apr.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
