12
DF13 Series
●
1.25mm Pitch Miniature Crimping Connector (UL Listed)
B
Precautions
Parallel
Diagonal
Parallel
Diagonal
Parallel
Diagonal
Parallel
Diagonal
<Precautions at Time of Insertion>
Align with the connector form and press down
continue pressing until there is a tactile click.
Method : Lightly grasping the base the cable, press
the connector with your finger and insert it.
Caution : Do not insert at an angle of 30° or greater.
Doing so will cause contact deformation or
case damage.
Method : Insert with the connector parallel.
Handing
Insertion Angle
<Precautions at Time of Disconnection>
Align with the connector form and press down
continue pressing until there is a tactile click.
Method : Grasp the cable so that the entire cable is
pulled evenly and it out.
Caution : Do not remove at an angle of 30° or greater.
Doing so will cause contact deformation or
case damage.
Method : Remove with the connector parallel.
Handing
Angle of Removal
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 02/2021. Contents are subject to change without notice for the purpose of improvements.
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
Feb.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
