The Model 400-DX has special compensation to drive long video cables on outputs 1 & 2. Use the following table to
set the dip switch
Dip Switch Setting Range of Cable on Outs 1 & 2
aa
0 to
100
feet
ba
100 to
250 feet
ab
250 to
400 feet
bb
400 to
600 feet
If you are using cables longer than 25 feet on the output of the splitter, make sure that the cable is connected to a
monitor for proper termination, otherwise disconnect the cable from the splitter.
Block Diagram
Specifications
Equipment included:
•
UL approved 110 vac adapter
•
6 ft high-resolution input cable
•
User’s Manual
Dimensions:
L x W x H:
7.25x2.75x1.25 inch
Weight:
2 lbs
Video Specs:
Connectors HDD15
female
Coupling DC
Video Level
0.7 v p-p
Video Gain
1 nominal
© Copyright 2005. Hall Research Technologies, Inc.
All rights reserved.
Page 2 of 2
