SW-DVI-2A/4A User's Manual
2
Trademarks Used In this Manual
Hall Research, HRT, and
(logo) are trademarks of Hall Research
Technologies, Inc.
Any other trademarks mentioned in this manual are
acknowledged to be the property of the trademark owners.
Federal Communications Commission Statement
This equipment generates, uses and radiates radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device, pursuant to Part 15 of the FCC
rules. Harmful interference when operated in a commercial environment.
Operation of this equipment in a residential area may cause interference, in
which case the user, at his own expense, will be required to take whatever
measures are necessary to correct the interference.
European Union Declaration of Conformity
This product has been tested and shown to comply with the
requirements of the European EMC directive 89/336/EEC
1.0 General
Thank you for purchasing Hall Research Technologies’ DVI Video
Splitter/Extender. The Splitters allow routing of a single DVI equipped device
(such as PC) to multiple DVI displays (such as plasma or LCD screens). The
Splitters support single-link, DVI-I (integrated Analog and/or Digital) video
signals at resolutions of up to 1600x1200. The DVI Splitters feature front panel
LED indicator for power on state, plus they can be used to extend the DVI
output to 10 meters (33 ft).
2.0 Features
•
Clear & sharp image at resolution up to 1600x1200 (including 1080i).
•
Supports both digital and analog DVI signals (DVI-I), allowing you to
connect a DVI-I equipped PC to monitors that have DVI-I or legacy
monitors with VGA inputs only
(In this case HD15 to DVI cable will be
necessary)
•
Can be cascaded (2-levels deep) for more outputs
•
Installs in minutes
•
Compliant with the specification of DVI 1.0
•
1U rack design for 4-channel version (Model SP-DVI-4A)
