HRW HPD0440BNMR V401 Manual 111116.doc E. & O. E. / Subject to change without notice Page 21 of 43
Operational Displays & Instruction
The screen prints used are example applications only to illustrate various features and functions. They
may not be from the same application throughout. In some cases they may be from different device
models but which have identical functions.
User Summary Screen
After breaking in to terminal mode the user defined point summary screen appears. This screen may be
programmed by the user to provide a dynamic listing of point values specific to the application running
in the device. Below is the factory default summary screen.
By entering
SLLD
(Screen Line Logic Display) the text line numbers, the point numbers relating to the
dynamic points assigned to each line and any SLL (Screen Line Logic) links are displayed.
On line 12 you can see a text entry that will not be seen when SLLD is off but will appear at the top of
the screen when the point set for SLL12 is high, in this case point 1 (Digital Input 1). Enter SLLD again
to revert to normal display mode. Below is the appearance of this hidden line when SLLD is off and DI1
is high.
You may use SLL settings for alarm or warning text that will only appear when the assigned point has a
value >0.