- 9 -
- 9 -
e) Maintain the tool carefully.
Make sure that moving parts are in good working condition and do not jam, and
check for broken or damaged parts that may impair proper function. Ensure that any
damaged parts are repaired before using the tool.
Poorly maintained power tools are responsible for many accidents.
f) Keep tools clean.
Carefully maintained tools jam less frequently and are easier to operate.
g) Follow these instructions when using the tool and accessories.
Take into account the working conditions and the work to be performed.
Using power tools for unintended purposes may be hazardous.
h) Use the correct tool
Do not use tools with insufficient power to perform the task.
Do not use tools for purposes and work for which they are not intended.
i) Check your tool for damage
Before using the tool, check for damaged parts and ensure that safety equipment
is in
good working order and functions as intended.
Check that moving parts are in working order and do not jam, that all parts are properly
mounted and none are broken, and that all conditions are correct for operating the tool.
Damaged protective equipment and parts should be properly repaired by a customer
service workshop
or replaced, unless this document specifies otherwise.
Damaged
power switches must be replaced by a customer service workshop. Do not use a tool
if the start switch does not function properly.
2.4.3 Service
!
All repairs should be carried out by qualified personnel, using only original
replacement parts available from HS-Technik GmbH.
Doing this will ensure that tool safety is maintained.
Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90
E-Mail: info@hs-technik.com – Web: www.hs-technik.com
