Ⅰ、EXP
951 DESCRIPTION
EXP951
Tool is a powder actuated tool that uses
.27
caliber,
10
-shot strip loads.
There are three key features in the tool. One is infinite regulation of the driving
power between limits. Another is the cartridges advanced to the chamber
automatically. The other is silencer built in the EXP
951
. The tool is designed for
installation into concrete or steel.
SPECIFICATIONS
• Weight
2.3 kg
• Length
39 cm
Ⅱ、
ACCEPTABLE BASE MATERIAL
I. Always check material being fastened into for hardness before attempting any fastening
operation.
2. Using a fastener as a center punch, strike the fastener against the work surface using an
average hammer blow and check the results as shown below (Wear safety goggles when
performing this procedure).
If the fastener point is flattened,
the material is too hard for power
actuated fastening.
If the fastener penetrates the material
easily, the material is too soft.
