HSL Töpferscheiben · Johannes-Diakonie Mosbach • Schwarzacher Werkstätten · Schwanheimer Straße 23 · Germany -74869 Schwarzach
7
3. Maintenance and Cleaning:
The potter‘s wheel is completely maintenance free.
●
Disconnect the power plug before cleaning.
●
Only clean with water or soapy water – do not use solvents such
as a nitro diluter. Marks on the stainless steel front plate can be
removed with an oily cloth.
●
The plate can be taken off for cleaning by removing the central
screw. After that the splash pan can be removed.
●
When fitting the plate, please make sure that no soiling, e.g. clay
residue, has collected on the ball bearing and the motor shaft.
If this is the case, remove the residue and grease the area with
Vaseline or acid-free grease. Pay attention to the correct position
of groove (hole of the wheelhead) and driving pins (motor shaft).
●
After fitting the plate, only tighten the central screw on the plate
lightly!
●
The potters wheel should only be reconnected and put into opera
-
tion after reinstallation of the splash pan and the plate.
