HSM 412.2
10
0802
english
Membrane keyboard
Reversing pushbutton
Cutting system runs in reverse
direction.
Stop pushbutton
Cutting system stops.
Shredder remains in standby
function.
ON pushbutton
Shredder is switched on.
Cutting system runs in feed
direction.
Front door opened
red LED
Paper jam – electric motor
overloaded
red LED
Cut material bag full
red LED
Ready for operation
green LED
3 Machine components
1 Safety
instructions
2 Funnel
fl ap
3 Cover
4 Membrane
keyboard
5 Mains
switch
6 Name
plate
7 Pusher
lever
8 Bottom
frame
9 Roller
10 Guide
roller
11 Door
12
Paper feed opening
Safety element / splinter protection
Only US-version:
Screw the document shredder to the wall tightly
for better stability. The fastening kit supplied is
only suitable for fi tting to a stone or concrete wall.
• Screw the brackets in (short side to the docu-
ment shredder) on the left and right, on the
back of the machine. The holes have already
been made on the back.
• Place the document shredder in the intended
location and make a mark for the holes on
the wall.
• Drill the holes for the plugs, insert the plugs
and then screw in the document shredder
tightly with the screws supplied.
10
9
6
11
1
2
3
4
0
I
5
8
7
12
