HSM 412.2
0802
11
english
Switching the paper shredder on
• Set mains switch at rear of paper
shredder to „I“.
Green LED lights.
Paper shredder is ready for opera-
tion (standby)
Notice
Safety switches are installed at the
door and funnel fl ap. Paper shredder
can only be switched on if the door and
the funnel fl ap are both closed.
Shredding smooth paper
• Feed paper. See „Tech-
nical data“ for sheet
capacity.
The shredding pro cess
is star ted by a pho to –cell
in the paper feeding
opening.
When the paper fee d
opening is free again,
the cut ting sy stem au-
to ma tical ly swit ches off
af ter app rox. 3 sec. and
returns to standby.
Swit ching paper shredder off
• Set mains switch at rear of paper
shredder to „0“.
0
I
0
I
The document shredder can also be
started by pressing the green arrow
button:
• Press briefl y:
Cutting device starts.
Automatic stop approx. 3 seconds af-
ter the last piece of paper was drawn
in, or manual stop when the stop but-
ton is pressed.
• Hold down for longer than 2 sec-
onds:
constant operation without light bar-
rier function.
The cutting device runs until it is
switched off with the stop button.
4 Operation
Shredding crumpled paper
• Pull back the pusher lever and
put the paper into the fi lling fun-
nel.
• Press the green arrow key.
• If the cutting device does not
catch the paper by itself, slowly
move the pusher lever forward.
Destroying credit cards, CDs, discs or
DAT cassettes
Fold the safety element down, switch the ma-
chine on to continuous operation and feed the
material into the insertion slot.
Discs
Credit
cards DAT-
CDs
cassettes
