HSM HSM FA 500.2, Operating Instructions Manual

1002 

13

FA 500.2

10 Technical Data

Cutting type

Cross cut

Cut size  

(mm)

10.5 x 40 - 76 

7.5 x 40 - 80

6 x 40 - 53

Safety level 

DIN 32757 – 1

2

2

3

Cutting capacity 

(sheets), DIN A4,  70 g/m

2

 80 

g/m

2

600 - 650
510 - 550

500 - 550
425 - 470

400 - 450
340 - 350

Cutting speed

210 mm/s

Effective width

500 mm

Weight

approx. 725 kg

Voltage

3 x 400 V, 50 Hz

Rated power

9.2 kW

Rated current

18.1 A

Fuse rate

32 A

Plug

CEE 32A

Ambient conditions in operation:

Temperature
Relative humidity
Height above sea-level (MSL)

-10 °C to +40 °C

max. 90 %, without condensation

max. 2,000 m

Sound level

 (idling / under load)

63 dB(A) / 80 dB(A)

EC Declaration of Conformity

The manufacturer 

HSM GmbH + Co. KG

, Austrasse 1 - 9, D-88699 Frickingen hereby declares that the machine, referred to here 

as
document shredder 

HSM FA 500.2

corresponds to the health and safety requirements of the following EC directives listed below due to its conception and design of 
the version in which it was put into circulation by us:

Machinery directive 2006 / 42 / EC
EMC directive 2004 / 108 / EC

Applied standards and technical specifi cations:
•  EN 349:1993 + A1:2008 

•  EN 62061:2005

•  EN 12100-1:2003 + A1:2009 

•  EN 12100-2:2003 + A1:2009

•  EN 55014-1:2006 

•  EN 55014-2:1997 + A1:2001

•  EN 61000-3-2:2006 

•  EN 60950-1:2006

•  EN 61000-3-3:1995 + A1:2001 + A2:2005

Authorised representative for the compilation of technical documentation:
Rolf Gasteier, HSM GmbH + Co. KG

Frickingen, 11.02.2010

Rolf Gasteier - Technical Director

The machine type was tested for compliance with the requirements of the EU Machinery Directive by:
TÜV Rheinland LGA Products GmbH, Tillystrasse 2, 90431 Nürnberg / Germany.
This test centre is responsible in accordance with Appendix XI of the EC Machinery Directive.

http://www.monomachines.com/

http://www.monomachines.com/