24
Powerline HDS 150
10/2015
• Clean the machine only with a soft cloth
and a mild soap-water solution. However,
no water must enter the equipment.
Never use scouring agents, cleaning
fl
uid,
petroleum or thinners.
• Grease the synchronous wheels (2).
Recommended lubricating grease:
K2K in line with DIN 51502/DIN 51825
• Reassemble the side plate.
8 Cleaning and maintenance
• Remove the left side plate (1).
Greasing the synchronous wheels
(quarterly)
FE
TT
GR
EA
SE
GR
AS
O
GR
AI
SS
E
VE
T
2
1
WARNING
Dangerous mains voltage!
Improper handling of the machine can lead
to an electric shock.
Switch off the machine before relo-
cating, cleaning or maintenance
and disconnect the mains plug.
Dispose of the machine in an environmen-
tally sound way at the end of its service life.
Observe the current regulations when doing this.
As legislation is subject to ongoing changes,
we request that you contact your local authori-
ties at the appropriate time. As the manufacturer,
HSM would be glad to advise you on the dis-
posal of your old machine.
9 Disposal/Recycling
EC Declaration of Conformity
The manufacturer
HSM GmbH + Co. KG
, Austraße 1-9,
88699 Frickingen / Germany, hereby declares that the
HSM HDS 150
hard drive shredder meets the fundamental
health and safety requirements of the following EC directives
on the basis of its design and construction in the version
marketed by us:
Machinery directive 2006 / 42 / EC
EMC directive 2004 / 108 / EC
Related standards:
EN 349, EN 953, EN 1037, EN 1088, EN ISO 12100,
EN 13849-1, EN ISO 13850, EN ISO 13857, EN 60204-1,
EN 61000-3-2, EN 61000-3-3, EN 61000-6-2,
EN 61000-6-4, EN 62061
Authorised representative for the compilation
of technical documentation:
Hubert Kötzinger, HSM GmbH + Co. KG
Frickingen, 24.8.2015
p.p. Hubert Kötzinger
Chief
Technical
Of
fi
cer (CTO)
Service work may only be carried out by the
HSM Customer Service or by the service tech-
nicians of our contractual partners.
english
