26
HSM Powerline HDS 150
01/2018
• Clean the machine only with a soft cloth
and a mild soap-water solution. However,
no water must enter the equipment.
Never use scouring agents, cleaning fluid,
petroleum or thinners.
8 Cleaning and maintenance
Greasing the synchronous wheels
(quarterly)
FE
TT
GR
EA
SE
GR
AS
O
GR
AI
SS
E
VE
T
2
1
WARNING
Dangerous mains voltage!
Improper handling of the machine can lead
to an electric shock.
Switch off the machine before relo-
cating, cleaning or maintenance
and disconnect the mains plug.
Dispose of the machine in an environmen-
tally sound way at the end of its service life.
Observe the current regulations when doing this.
As legislation is subject to ongoing changes,
we request that you contact your local authori-
ties at the appropriate time. As the manufacturer,
HSM would be glad to advise you on the dis-
posal of your old machine.
9 Disposal/Recycling
EU Declaration of Conformity
The manufacturer
HSM GmbH + Co. KG
, Austraße 1-9,
88699 Frickingen / Germany, hereby declares that the
HSM HDS 150
hard drive shredder meets the fundamental
health and safety requirements of the following EU directives
on the basis of its design and construction in the version
marketed by us:
Machinery directive 2006 / 42 / EC
EMC directive 2004 / 108 / EU
Related standards:
EN 349, EN ISO 14120, EN 1037, EN 1088, EN ISO
12100, EN 13849-1, EN ISO 13850, EN ISO 13857, EN
60204-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2,
EN 61000-6-4, EN 62061
Authorised representative for the compilation
of technical documentation:
Hubert Kötzinger, HSM GmbH + Co. KG
Frickingen, 15.1.2018
p.p. Hubert Kötzinger
Chief Technical Officer (CTO)
Service work may only be carried out by the
HSM Customer Service or by the service tech-
nicians of our contractual partners.
• Grease the synchroniser wheels (2).
Recommended lubrication: K2K to
DIN 51502/DIN 51825
• Put the rear panel back on.
• Remove the rear panel (1).
english
