12
HSM Pure 530
05/2015
english
4 Initial
start-up
WARNING
Dangerous mains
voltage!
Improper handling of the machine can lead
to an electric shock.
– Only use the machine in a dry room
indoors. Never operate the machine in
damp rooms or in the rain.
– Keep the machine, the plug and cable
away from open
fi
re and hot surfaces.
The ventilation slots must not be blocked
or covered and there must be at least
5 cm space between the shredder and
any wall or furniture.
– Make sure that the power plug is easily
accessible.
– Before you insert the power plug, make
sure that the voltage and frequency
of your power supply comply with the
information on the name plate.
5 Operation
• Set mains switch at rear of paper shredder
to “I”.
• Press the operation button.
The “Ready for operation” indicator
lights up.
Switching on the shredder
Shredding paper
• Feed the paper into the centre of the
paper slot. The light barrier starts the
cutting unit automatically. Therefore, with
thin paper strips, make sure the light bar-
rier detects them.
Three seconds after the light barrier in
the paper feed opening is free again, the
cutting unit is switched off automatically
and the shredder switches to standby.
• Connect the power cable provided to the
back of the document shredder and plug
the power supply into a properly installed
socket.
