18
SECURIO P 44
03/2013
english
9 Technical
data
EC Declaration of Conformity
The manufacturer
HSM GmbH + Co. KG
, Austraße 1 - 9, 88699 Frickingen / Germany hereby declares that the ma-
chine, referred to here as
document shredder
Securio P44
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical speci
fi
cations:
• EN 55014-1:2006
• EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 55014-2:1997 + A1:2001 + A2:2008
• EN 61000-4-4:2004
• EN 61000-3-2:2006 + A1:2009 + A2:2009
• EN 61000-4-5:2006
• EN 61000-3-3:2008
• EN 61000-4-6:2007 + Corr. Aug. 2007
• EN 62233:2008
• EN 61000-4-11:2004
• EN 60950-1:2006 + A12:2011
Cutting type
Strip cut
Cross cut
Shred size
(mm)
5.8
3.9
3.9 x 40
1.9 x 15
0.78 x 11
1 x 5
Sa fe ty ra ting
DIN 66399
DIN 32757 – 1
P-2/O-2/T-2
E-2
2
P-2/O-2/T-2
E-2
2
P-4/O-3/T-4
E-3/F-1
3
P-5/O-4/T-5
E-4/F-2
4
P-6/F-3
5
P-7/F-3
Level 6*
Cutting ca pa ci ty**
(sheets), DIN A4 80 g/m
2
70 - 72
56 - 58
39 - 41
23 - 25
15 - 16
10
Cutting speed
100 mm/s
Lo ading width
400 mm
Voltage
Power
for the maximum number of sheets
230 V, 50 Hz 120 V, 60 Hz
2 600 W
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
Dimensions
W x D x H (mm)
700 x 592 x 1025
Weight
ca. 108 kg
Volume of the shredded paper container
205 l
Sound pressure level emissions
(Idle running/ load)
64 - 67 dB(A) / 65 dB(A)
Cutting size of the separate CD cutting
unit
(optional)
Order C, E ***
Order M, N ***
3.9 x 40 mm
2.2 x 2.0 mm
* HSM-speci
fi
cation
*** Identi
fi
ed by the letter after the 7-digit order number on the name plate on the back of the machine.
e.g. 1873111C >> cutting size 3.9 x 40 mm
** The maximum number of sheets (DIN A4, 80 g/m²), fed lengthways, which can be cut in one cycle. The performance
data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage or a differ-
ent mains frequency to the one speci
fi
ed could result in less sheet capacity and increased noise during operation. The
sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
Frickingen, 22.2.2013
i.V. Hubert Kötzinger - Head of Environmental Engineering Product Development
Summary of Contents for securio P44
Page 91: ...03 2013 SECURIO P 44 91 ...
