HT61 - HT62
EN - 16
5.8. TEMPERATURE
MEASUREMENT WITH K PROBE (HT62)
CAUTION
Before attempting any temperature measurement, cut off power supply from
the circuit to be measured and make sure that all capacitors are discharged,
if present.
Fig. 9: Use of the instrument for Temperature measurement
1. Select position
°C°F
2. Press the
MODE
key until the symbol
“
°C
”
or
“
°F
”
is displayed.
3. Insert the provided adapter into input terminals
Hz%V
(po) and
COM
(polarity -) (see Fig. 9)
4. Connect the provided K-type wire probe or the optional K-type thermocouple (see § ) to
the instrument by means of the adapter, respecting the positive and negative polarity
on it. The display shows the value of temperature.
5. The message
“
O.L.
”
indicates that the value of temperature exceeds the maximum
measurable value.
6. To use the HOLD function, see § 4.2.
