THT32
EN - 7
4.2 DESCRIPTION OF FUNCTION KEYS
The instrument is provided with 6 function keys indicated as
Menu/
,
Enter
,
,
,
,
and with a trigger key
“
T
”
.
4.2.1 Menu/ key
Press the
Menu/
key to switch on the instrument. The instrument shows the normal
measuring screen. To switch off the instrument, press and hold for 2 seconds the
Menu/
key. With the instrument switched on, press the
Menu/
key to enter/exit the general
menu (see §)
4.2.2 Enter
key
Pressing the
Enter
key allows entering the programming section an saving the value of
system parameters in the instrument
’
s general menu (see §).
4.2.3 Keys
,
,
,
The arrow keys
,
,
,
allow setting system parameters in the instrument
’
s general
menu, and defining percentage and distance of the
“
Blending Fusion
”
function (see §). The
arrow keys
,
,
,
also allow scrolling through the images saved in the micro SD card
(see §).
4.2.4 T key (Trigger)
Pressing the trigger key
T
found on the front part of the instrument allows activating the
Data HOLD function (freezing an image on the display) in order to save it in the micro SD
card (see §).
4.2.5 Inserting the micro SD Card
To insert the micro SD card, proceed as follows:
1. Open the battery compartment cover (see Fig. 1
–
part 8)
2. Insert the micro SD card into the dedicated slot inside the battery compartment (see
Fig. 3
–
part 2)
3. Note the “
” symbol at display
4. Restore the battery compartment cover to its position.
