THT45 - THT45W - THT46
EN - 24
5.2.6 “Range” Menu
In this section it is possible to define the temperature measuring range of the instrument
and the activation/deactivation of Screening function
1. Select the item “Range” using the keys or and press the key
. The screen Fig.
27 – Right side is shown on the display
Fig. 27: Setting measuring range on the instrument
2. Use the keys or to select the measuring range among the options;
-20°C
150
°C,
0°C
350°C
or
Screening
(see § 5.5.3)
3. Press the “Select” key or the key
to confirm the operation and go back to the
previous screen of the “Close” key to exit without any modification.
5.2.7 Image adjustment
In this section it is possible to define the adjusting mode of the temperature associated
with the image framed on the display. The following modes are available:
Auto
(default)
Manual
To set Manual mode, proceed as follows:
1. Press the right key
and set the symbol on the display.
2. Press and hold the key for 2 seconds. The following screen (see Fig. 28 – Left side)
is shown on the display.