Connecting to a Wi-Fi network with EAP-TLS security
You may need to install a network certificate (*.p12) to your phone before you can
connect to a Wi-Fi network with EAP-TLS authentication protocol.
1.
Save the certificate file to the root folder of the storage card.
2.
From the Home screen, press MENU, and then tap
Settings
>
Security
.
3.
Tap
Install from SD card
.
4.
Select the network certificate needed to connect to the EAP-TLS network.
5.
Follow the steps in
Turning Wi-Fi on and connecting to a wireless network
on
page 102 to connect to the Wi-Fi network.
Checking the wireless network status
1.
From the Home screen, press MENU, and then tap
Settings
>
Wireless &
networks
.
2.
On the Wireless & networks screen, tap
Wi-Fi settings
, and then tap the wireless
network that the phone is currently connected to.
A message box is then displayed showing the Wi-Fi network name, status, speed,
signal strength, and more.
If you want to remove the settings for this network from your phone, tap
Forget
. If
you want to reconnect to a wireless network that you have removed, you'll need to
choose the wireless network from the list of available Wi-Fi networks again. If it is a
secured wireless network, you'll need to enter the wireless network credentials
again.
Connecting to another Wi-Fi network
1.
From the Home screen, press MENU, and then tap
Settings
>
Wireless &
networks
.
2.
Tap
Wi-Fi settings
. Detected Wi-Fi networks are displayed in the Wi-Fi
networks section.
3.
To manually scan for available Wi-Fi networks, on the Wi-Fi screen, press MENU,
and then tap
Scan
.
4.
Tap another Wi-Fi network to connect to it.
103
Internet connections